View A024QN01V0_7871430.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

* no reproduction and redistribution allowed doc. version 0.3 effective date 2007.08.03 total pages 22 (not include this cover page) note: the content of this specification is subject to change. ? 2007 au optronics all rights reserved, do not copy. model name: a024qn01 v0 product specification 2.4 color tft- lcd pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 0/ 22 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. record of revision version revise date page content 0.0 2007/02/08 first draft 0.1 2007/03/12 15 modify transmittance from 5.5% to 6.0% 0.2 2007/05/23 18 21-22 update g. suggested fpc layout circuit . add i. recommended initial code . 0.3 2007/08/03 21-23 update i. recommended initial code . pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 1 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. index a. general specification.....................................................................2 1. physical specifications........................................................................................2 b. electrical specifications..................................................................3 1. input/output signal interface................................................................................3 2. absolute maximum ratings.................................................................................7 3. electrical characteristics......................................................................................8 3.1 typical operating conditions............................................................................................8 3.2 power consumption (note 1)...........................................................................................8 4. ac characteristics...............................................................................................9 4.1 cpu i80 system...............................................................................................................9 4.2 cpu i68 system.............................................................................................................11 c. optical specification.....................................................................13 d. reliability test items:....................................................................15 1. test items and conditions...................................................................................15 e. packing form...............................................................................16 f. outline dimensions of tft lcd drawing......................................17 g. suggested fpc layout circuit.....................................................18 h. suggested pin assignment of fpc...............................................19 i. recommended initial code............................................................21 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 2 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. general specification 1. physical specifications no. item specification remark 1 display method active matrix tft 2 display mode transmissive 3 display resolution (dot) 240 x rgb (h) x 320(v) 4 active area (mm) 36.72 (h) x 48.96 (v) 5 screen size (inch) 2.41 inch diagonal 6 pixel pitch (mm) 0.153(h) x 0.153(v) 7 color configuration r. g. b. stripe 8 display color 262k colors 9 surface treatment hard coating 10 transmittance 6.0% (typ.) 11 overall dimension (mm) 40.58(h)x 56.96(v)x 1.26(t) note 1 12 view direction 12 o clock 13 weight (g) tbd key features n display moving pictures up to 30 fps, and support area scrolling and partial display n mcu interface and rgb interface standardization. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 3 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. electrical specifications 1. input/output signal interface pin no. symbol i/o description connection when no use 1, 2, 142, 143 dummy n dummy pin n.c. 3 ~ 5, 139 ~ 141 vcom i vcom of lcd panel input. 6 ~ 13 vpp1 ~ vpp3 i nvm power input open 14 testo2 o test pin open 16 testo3 o test pin open 17, 18 test1, 2 o test pin iognd 19 test4 o test pin iovcc 20 test5 o test pin iognd 21 protect o test pin iovcc 22 ~ 25 im[3..0] i select the mcu system interface mode im3 im2 im1 im0 mcu i/f db pin used 0 0 0 0 invalid 0 0 0 1 invalid 0 0 1 0 db[17..10], db[8..1] 0 0 1 1 db[17..10] 0 1 0 id sdi, sdo 0 1 1 * invalid 1 0 0 0 invalid 1 0 0 1 invalid 1 0 1 0 i-80, 18bit db[17.. 0] 1 0 1 1 i-80, 9bit db[17..9] 1 1 * * invalid when the serial peripheral interface is selected, im0 pin is used for the device code id setting. 26, 28 testo4, 5 o test pin open 29 reset i global reset iovcc 30 vsync i vertical synchronous signal iovcc 31 hsync i horizontal synchronous signal iovcc pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 4 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 32 dclk i dot clock iovcc 33 enable i data eneable signal for rgb interface operation. low: select (access enabled) high: not select (access inhibited) iovcc 34 ~ 43 db[17.. 8] i 45 ~ 52 db[7.. 0] i an 18-bit parallel bi-directional data bus for mcu system interface mode 8-bit i/f: db[17:10] is used. 9-bit i/f: db[17:9] is used. 16-bit i/f: db[17:10] and db[8:1] is used. 18-bit i/f: db[17:0] is used. 18-bit parallel bi-directional data bus for rgb interface operation 6-bit rgb i/f: db[17:12] are used. 16-bit rgb i/f: db[17:13] and db[11:1] are used. 18-bit rgb i/f: db[17:1] are used. iovcc 53 sdo o serial data output open 54 sdi i serial data input iovcc 55 rd i a read strobe signal and enables an operation to read out data when the signal is low. iovcc 56 wr i a write strobe signal and enables an operation to write data when the signal is low. iovcc 57 rs i a register select signal. low: select an index or status register high: select a control register iovcc 58 cs i a chip select signal. low: the chip is selected and accessible high: the chip is not selected and not accessible iovcc 60 testo9 o test pin open 61 fmark o output a frame head pulse signal. the fmark signal is used when writing ram data in synchronization with frame. leave the pin open when not in use. open 62 ~ 69 ts [0..8] o test pin open 70 tsc o test pin iognd pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 5 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 71, 73, 74 testo10, 11, 12 o test pin open 75 dummyr n dummy pin n.c. 76 ~ 78 iognd g io ground 79 ~ 81 iovcc pi io digital power supply 82 ~ 84 vci pi analog power input, 2.6~3.3v is recommended. 85 ~ 87 vdd c charge pumping circuit pin, connect to a capacitor 88 ~ 90 agnd g analog ground 91 ~ 95 agnd g analog groun 96 vgs c charge pumping circuit pin, connect to ground 97, 98 vcom o vcom from ic, connect it to pin139 ~ 141 and pin 3 ~ 5 99, 100 vcomh c charge pumping circuit pin, connect to a capacitor 101, 102 vcoml c charge pumping circuit pin, connect to a capacitor 103 vreg1out c charge pumping circuit pin, connect to a capacitor 104 vcomr i a reference level to generate the vcomh level either with an externally connected variable resistor or by setting the register of the ic. when using a variable resistor, halt the internal vcomh adjusting circuit by setting the register and place the resister between vreg1out and ag nd. when generating the vcomh level by setting the register, leave this pin open. open 105 vcl c charge pumping circuit pin, connect to a capacitor 106 ~108 avdd c charge pumping circuit pin, connect to a capacitor 109 ~ 111 vci1 c charge pumping circuit pin, connect to a capacitor 112 ~ 115 vci pi analog power input, 2.6~3.3v is recommended. 116, 117 c12- c charge pumping circuit pin, connect to a capacitor pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 6 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 118, 119 c12+ c charge pumping circuit pin, connect to a capacitor 120, 121 c11- c charge pumping circuit pin, connect to a capacitor 122, 123 c11+ c charge pumping circuit pin, connect to a capacitor 124 ~ 127 vgl c charge pumping circuit pin, connect to a capacitor 128 ~ 130 vgh c charge pumping circuit pin, connect to a capacitor 131 c13- c charge pumping circuit pin, connect to a capacitor 132 c13+ c charge pumping circuit pin, connect to a capacitor 133 c21- c charge pumping circuit pin, connect to a capacitor 134 c21+ c charge pumping circuit pin, connect to a capacitor 135 c22- c charge pumping circuit pin, connect to a capacitor 136 c22+ c charge pumping circuit pin, connect to a capacitor 137 c23- c charge pumping circuit pin, connect to a capacitor 138 c23+ c charge pumping circuit pin, connect to a capacitor 15, 44, 72 iognddum o output the iognd voltage level. 27, 59 iovccdum o output the iovcc voltage level. note 1: refer below figure to indicate pin1 and pin143. note 2: customer can refer to h item of page 21 to design fpc. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 7 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. fpc pin 1 pin 143 display area s720 s1 g1 g2 2. absolute maximum ratings item symbol min. max. unit remark input power supply vcc -0.3 4.6 v note 1 lcd supply voltage range vgh-vgl -0.3 30 v lcd input voltage range vi -0.3 vcc+0.3 v note 2 operating temperature (ambient) t opa 0 60 storage temperature (ambient) t stg -25 80 note 1: if the module exceeds the absolute maximum ratings, it may be damaged permanently. also, if the module operated with the absolute maximum ratings for a long time, its reliability may drop. note 2: db0 ~db15 , cs , rs , wr , rd , reset pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 8 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 3. electrical characteristics 3.1 typical operating conditions item symbol min. typ. max. unit remark input power supply vcc 2.6 2.8 3.3 v note 1 h level v ih 0.7 x vcc - vcc v input signal voltage l level v il 0 - 0.3 x vcc v note 2 h level v oh 0.8 x vcc - vcc v output signal voltage l level v ol 0 - 0.2 x vcc v note 3 note 1: the operations are guaranteed under the recommended operating conditions only. these operations are not guaranteed if a quick voltage change occurs during operation. to prevent noise, a bypass capacitor must be inserted into the line close to power pin. note 2: cs , rs , dbn (n=0 ~15) , wr , rd , , reset note 3: dbn (n=0 ~15) 3.2 power consumption (note 1) mode symbol condition min. typ. max. unit remark stand-by p s - tbd mw note 2 partial display p p - - tbd mw note 3 still (65k colors) p g v cc = 2.8v - - tbd mw note 4 note 1: no backlight is driven note 2: display off, black pattern note 3: 20 black display lines note 4: full screen with 65k colors (line inversion) pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 9 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4. ac characteristics 4.1 cpu i80 system vdd = 2.6 to 3.3v, agnd=dgnd=0v, ta = -30 to 70 c figure 1: parallel interface characteristics (8080-series mcu) t chw vih vil t chw t csf t csh t cs t csf csx vih vil t ast t aht t wc t wrl t wrh t dst t dht t aht t rcs / t rcsfm t rdl / t rdlfm t rdh / t rdhfm t rc / t rcfm t ast t rat / t ratfm t odh vih vil vih vil vih vil vih vil d/cx wrx d[17:0] write rdx d[17:0] read pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 10 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. signal symbol parameter min max unit t ast address setup time 10 ns d/cx t aht address hold time (write/read) 10 ns t chw chip select h pulse width 0 ns t cs chip select setup time (write) 35 ns t rcs chip select setup time (read id) 45 ns t rcsfm chip select setup time (read fm) 355 ns t csf chip select wait time (write/read) 10 ns csx t csh chip select hold time 10 ns t wc write cycle 100 ns t wrh control pulse h duration 35 ns wrx t wrl control pulse l duration 35 ns t rc read cycle (id) 160 ns t rdh control pulse h duration (id) 90 ns rdx (id) t rdl control pulse l duration (id) 45 ns t rcfm read cycle (fm) 450 ns t rdhfm control pulse h duration (fm) 90 ns rdx (fm) t rdlfm control pulse l duration (fm) 355 ns t dst data setup time 10 ns t dht data hold time 10 ns t rat read access time (id) 40 ns t ratfm read access time (fm) 340 ns d[17:0] t odh output disable time 20 80 ns the input signal rise time and fall time for vih and vil is specified at 15ns or less. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 11 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4.2 cpu i68 system vdd = 2.6 to 3.3v, agnd=dgnd=0v, ta = -30 to 70 c t cs t rcs /t rcsfm vih vil vih vil vih vil vih vil vih vil vih vil vih vil vih vil t csh t chw t csf t aht t ast t wc t wrh t wrl t dst t dht t odh t rdl / t rdlfm t rdh / t rdhfm t rc / t rcfm t rat / t ratfm csx d/cx /wx e d[17:0] write rx e d[17:0] read figure 2: parallel interface characteristics (6800-series mcu). pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 12 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. signal symbol parameter min max unit t ast address setup time 10 ns d/cx t aht address hold time (write/read) 10 ns t chw chip select h pulse width 0 ns t cs chip select setup time (write) 35 ns t rcs chip select setup time (read id) 45 ns t rcsfm chip select setup time (read fm) 355 ns t csf chip select wait time (write/read) 10 ns csx t csh chip select hold time 10 ns t wc write cycle 100 ns t wrh control pulse h duration 35 ns wrx t wrl control pulse l duration 35 ns t rc read cycle (id) 160 ns t rdh control pulse h duration (id) 90 ns rdx (id) t rdl control pulse l duration (id) 45 ns t rcfm read cycle (fm) 450 ns t rdhfm control pulse h duration (fm) 90 ns rdx (fm) t rdlfm control pulse l duration (fm) 355 ns t dst data setup time 10 ns t dht data hold time 10 ns t rat read access time (id) 40 ns t ratfm read access time (fm) 340 ns d[17:0] t odh output disable time 20 80 ns the input signal rise time and fall time for vih and vil is specified at 15ns or less. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 13 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. c. optical specification item symbol condition min. typ. max. unit remark rise tr - 12 - ms response time fall tf =0 - 18 - ms note 4 contrast ratio cr at optimize viewing angle 250 300 - - note 5 transmittance % 6.0 % top 40 60 - bottom 10 20 - left 30 45 - viewing angle right - cr R 5 30 45 - deg. note 6 wx 0.26 0.31 0.36 color tone white wy =0 0.28 0.33 0.38 - note 1: ta =25 2 . note 2: to be measured in the dark room. note 3: to be measured at the center area of panel with a aperture of 1 by topcon luminance meter bm-5a , after 10 minutes module operation. note 4: definition of response time: the output signals of photo detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 14 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. refer to figure as below: note 5. definition of contrast ratio: contrast ratio is calculated with the following formula. contrast ratio (cr)= note 6. definition of viewing angle: refer to the figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% photo detector output when lcd is at white state photo d etector output when lcd is at black state pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 15 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. reliability test items: 1. test items and conditions no. test items conditions remark 1 high temperature storage ta= 80 168h 2 low temperature storage ta= -25 168h 3 high temperature operation ta= 60 168h 4 low temperature operation ta= 0 168h 5 high temperature and high humidity ta= 60 . 90% rh 168h operation 6 heat shock -25 ~80 /50 cycles 2h/cycle non-operation 7 electrostatic discharge 200v, 200pf(0 ), once for each terminal non-operation 8 drop (with carton) height: 80cm 1 corner, 3 edges, 6 surfaces note 1: ta: ambient temperature. note 2: after finishing the test, leave the samples under room temperature and normal humidity for 2 hours, and then this module should work normally. note 3: failure judgment criterion: a. squarely inspect all lcd function before and after reliability test. b. in the standard conditions, there is not display function ng issue occurred. all the cosmetic specification is judged before the reliability stress. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 16 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. packing form tbd pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 17 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. f. outline dimensions of tft lcd drawing pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 18 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. g. suggested fpc layout circuit pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 19 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. h. suggested pin assignment of fpc pin no. symbol i/o description remarks 1 vci pi analog power input, 2.6~3.3v is recommended. 2 iovcc pi digital power input, 1.65~3.3v is recommended. 3 cs i a chip select signal. low: the chip is selected and accessible high: the chip is not selected and not accessible 4 rs i a register select signal. low: select an index or status register high: select a control register 5 wr i a write strobe signal and enables an operation to write data when the signal is low. 6 rd i a read strobe signal and enables an operation to read out data when the signal is low. 7 db0 i 8 db1 i 9 db2 i 10 db3 i 11 db4 i 12 db5 i 13 db6 i 14 db7 i 15 db8 i 16 db9 i 17 db10 i 18 db11 i 19 db12 i 20 db13 i 21 db14 i 22 db15 i 23 db16 i an 18-bit parallel bi-directional data bus for mcu system interface mode 8-bit i/f: db[17:10] is used. 9-bit i/f: db[17:9] is used. 16-bit i/f: db[17:10] and db[8:1] is used. 18-bit i/f: db[17:0] is used. 18-bit parallel bi-directional data bus for rgb interface operation 6-bit rgb i/f: db[17:12] are used. 16-bit rgb i/f: db[17:13] and db[11:1] are used. 18-bit rgb i/f: db[17:1] are used. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 20 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 24 db17 i 25 enable i data eneable signal for rgb interface operation. low: select (access enabled) high: not select (access inhibited) 26 dclk i dot clock 27 hsync i horizontal synchronous signal 28 vsync i vertical synchronous signal 29 reset i global reset 30 vss g ground note 1: i: digital signal input, o: digital signal output, io: digital inout pin, g: gnd, pi: power input. note 2: customer could consider putting led pad on fpc. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 21 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. i. recommended initial code step register address register value remark 1 r00h 0x0000 2 r01h 0x0100 3 r02h 0x0701 4 r03h 0xd030 for 8-bit data bus d15[tri]=1, 18 bit in 3 times transfer. set d15[tri] =0, when using neither 8-bit nor 16-bit . 5 r04h 0x0000 6 r08h 0x0207 7 r0ah 0x0000 8 r0ch 0x0000 9 r0dh 0x0000 10 r0fh 0x0000 11 r07h 0x0101 12 r10h 0x15b0 13 r11h 0x0007 14 r17h 0x0001 15 r12h 0x01bb 16 r13h 0x1c00 17 r29h 0x0012 18 r50h 0x0000 19 r51h 0x00ef 20 r52h 0x0000 21 r53h 0x013f 22 r30h 0x0102 gamma setting of vsd0 23 r31h 0x0c20 gamma setting of vsd1 24 r32h 0x0b21 gamma setting of vsd2 25 r33h 0x250f gamma setting of vsd61 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 22 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 26 r34h 0x1d0b gamma setting of vsd62 27 r35h 0x0a04 gamma setting of vsd63 28 r36h 0x1701 gamma setting of vsd13 29 r37h 0x0617 gamma setting of vsd50 30 r38h 0x0305 gamma setting of vsd4 31 r39h 0x0a05 gamma setting of vsd8 32 r3ah 0x0f04 gamma setting of vsd20 33 r3bh 0x0f00 gamma setting of vsd27 34 r3ch 0x000f gamma setting of vsd36 35 r3dh 0x050f gamma setting of vsd43 36 r3eh 0x0204 gamma setting of vsd55 37 r3fh 0x0404 gamma setting of vsd59 38 r90h 0x2700 39 r92h 0x0000 40 r93h 0x0103 41 r95h 0x0110 42 r97h 0x0000 43 r98h 0x0000 44 rf0h 0x5408 45 rf3h 0x0010 46 rf4h 0x001f 47 rf0h 0x0010 49 r07h 0x0173 50 r95h 0x0110 51 r97h 0x0000 52 r98h 0x0000 53 rf0h 0x5408 54 rf3h 0x0005 55 rf4h 0x001f pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.3 page: 23 / 23 all rights strictly reserved. any portion of this paper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 56 rf0h 0x0000 57 r07h 0x0173 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A024QN01V0

	To Download A024QN01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .